Access5830™ User Manual
10
Access Point Set Up and Configuration
It is recommended to set up the AP prior to setting up the SU’s.
In the process of configuring the AP, you will:
1. Review and modify basic system information such as Base ID, RF Channel, etc.
2. Add SU’s to the Subscriber Unit Database (SUDB).
Logon to the AP and to receive a comprehensive snapshot of the system’s status, type the command
sysinfo
. The result appear similar to:
Many of these parameters can be changed by the user. A description of each of these changeable
parameters, along with the related command is shown in the table below. Please note that in order to save
any changes to persistent storage, you must type the command:
updateflash systemsetting
. If you do not
update the flash, settings will be reset after reboot.
AP SYSINFO PARAMETERS AND RELATED COMMANDS
Parameter
Description
Related CLI Command
Device ID
Mac ID of AP
N/A
Base ID
Specifies the cell or cluster that
the AP belongs to. Base ID is
one of three key pieces of
information, along with active
channel, and subscriber database
information for the link
establishment between the AP
and SU’s
set baseid <baseid>