Access5830™ User Manual
28
OPMODE
Command Description
OFF AP SU
AP or
SU?
Remarks
reset [all | <n1> <n2> ..]*
reset radio to be firmware default
for AP: n# = 0..3
for SU: n# = 0..2
se
Both
AP Defaults:
0 - BASE ID = 1, AP ID = 1
Subnet Mask = 255.255.255.0
Gateway = radio ip
Password = trango
1 - Channel Tables
Active Channel = 1 h
2 - Tx Power = Max
RF Threshold = -90 dBm
Target RSSI = -60 dBm
Service Radius = 10mi for ISM
4 mi UNII
MIR Threshold = off
3 - SNMP Community String
(Read/Write) = (public/private)
SU Defaults:
0 - BASE ID = 1, AP ID = 1
SU ID = 1
Subnet Mask = 255.255.255.0
Gateway = radio ip
Password = trango
1 - Channel Tables
Scan Table = 1 h 7 h
Active Channel = 1 h
2 - Tx Power = Max
RF Threshold = -90 dBm
rfrxth <ism|unii> <-90|-85|-80|-75|-70|-
65>*
specify RF rx threshold
se
se
se
Both
default = -90 for both bands
rfrxthreshold …*
same as “rfrxth”
Both
rssi
display current Rx rssi
se
se
Both
rssi r +
display Rx rssi continuously
se
se
Both
save ….*
same as “updateflash”
Both
set apid <ap-id>
set ap id, <ap-id> = 1..255
se
se
se
Both