Access5830™ User Manual
25
Appendix 1
Access5830™ Command Line Interface (CLI)
Command Set Summary
Notes:
OPMODE:
s -
indicates command can be executed via serial port (Hyperterminal)
e -
indicates command can be performed via Ethernet (telnet) session.
OFF
indicates command can be performed in opmode OFF
AP
indicates command can be performed in opmode AP
SU
indicates command can be performed in opmode SU
<su-id> = 1..8190
* New / Changed from M5800 series
+ indicates command may not work properly through http’s command console.
OPMODE
Command Description
OFF AP SU
AP or
SU?
Remarks
!+
redo the last command
s
s
s
both
?
display complete help pages
se
se
se
both
? <command>
search and display command’s help
se
se
se
both
_password <new password> <new
password>
specify new password (max 15 octs)
se
se
se
both
apsearch <sec> <ch #> <v | h> <ch #>
<v | h>….*+
monitor traffic from all APs
se
both
baud [9600 | 115200]
display or set console baud rate
se
se
se
both
default = 9600 bps
bcastscant <all | suid> <ch#> <h | v>
….
broadcast scan and channel frequency table to
single or all SU
se
AP
- up to 31 channel and
polarization
- it will broadcast packet every
