Trango Broadband Wireless Access5830™ User Manual
User Manual Rev 1
23
5.2. Step by Step Configuration of The SU
System Information
Page:
Configuration
Page:
SU ID
: This parameter is Subscriber ID (1~8190) of an SU. Each subscriber in a
sector shall have a unique ID.
Switch (Block Broadcast and Multicast Packets)
: This switch enables/disables
the blocking of Ethernet control packet except ICMP and ARP to reduce the
amount of unnecessary overhead introduced to the wireless link.
Switch (Auto Scan AP)
: This switch enables/disables the SU to look for another
AP on a different channel when the previous link with an AP is down.
This redundancy feature is only available when you have 2 AP’s serving the
same sector. See Scan AP Sequence below for channel setting.
Switch (TCP/IP Service for AP)
: This switch enables/disables the SU to accept
TCP/IP request from the AP side. When the switch is turned on, you can
ping/HTTP/telnet into the SU from the AP side. Please note that this switch
has no effect on the SU accepting TCP/IP request from the SU side when the SU
is in su mode.
