Trango Broadband Wireless Access5830™ User Manual
User Manual Rev 1
20
Device ID
: This parameter is the MAC address of the subscriber unit,
which can be found on the back of the SU.
Modify and Save Button
: This button allows you to save the changes on SU ID,
Type, SU to SU Group, CIR, and MIR field to the subscriber database.
Add and Save Button
: This button allows you to save the addition of subscriber
to the subscriber database, one at a time.
Delete and Save Button
: This button allows you to save the deletion of
subscriber from the subscriber database, one at a time.
Link Control
Page:
This HTML page is used to verify the link between an AP and SU after the
minimum setup is done, which includes the Configuration page and the
Subscriber Database page.
Please note that both AP and SU shall be in opmode (ap or su) before getting
into this page. Otherwise, you will receive an error message of “This function
is disabled when opmode is OFF”. To activate the radio, please refer to above
Active Opmode hyperlink
under the Configuration Page.
SU Association Status Table
: This table shows association status for all SU’s in
the sector that is served by this AP. There are three states in this table that
will be described in details as follows:
