Trane XR16 4TTR6, Product Data

Page: 6 / 16

6 22-1889-01
General
Data
AHRI Standard Capacity Rating Conditions
AHRI STANDARD 210/240 RATING CONDITIONS —
(A) Cooling 80°F DB, 67°F WB air entering indoor coil,
95°F DB air entering outdoor coil.
AHRI STANDARD 270 RATING CONDITIONS — (Noise
rating numbers are determined with the unit in cooling opera -
tion.) Standard Noise Rating number is at 95°F outdoor air.
Accessory Description and Usage
Anti-Short Cycle Timer — Solid state timing device that
prevents compressor recycling until 5 minutes have elapsed
after satisfying call or power interruptions. Use in area with
questionable power delivery, commercial applications, long
lineset, etc.
Evaporator Defrost Control — SPST Temperature actuated
switch that cycles the condenser off as indoor coil reaches
freezB-up conditions. Used for low ambient cooling to 30°F
with TXV.
Rubber Isolators — 5 large rubber donuts to isolate con -
densing unit from transmitting energy into mounting frame or
pad. Use on any application where sound transmission needs
to be minimized.
Hard Start kit — Start capacitor and relay to assist compres -
sor motor startup. Use in areas with marginal power supply,
on long linesets, low ambient conditions, etc.
Extreme Condition Mount Kit — Bracket kits to securely
mount condensing unit to a frame or pad without removing
any panels. Use in areas with high winds, or on commercial
roof tops, etc.