background image

18-HD64D1-1 

 

    5 

Temperature Sensing Considerations

Wireless Reception Considerations

Removing Sub-Base Wall Plate

The thermostat sensor is designed for installation 
in climate controlled living spaces.  It is recom-
mended to place the sensor in central locations 
with good circulation.  Avoid exterior walls and ar-
eas near windows, doors, vents or concealed pipes 
or chimneys.   

If enabling wireless, choose a mounting location that ensures adequate signal strength.  

A wireless device may have significantly different signal strengths if its position chang-
es relative to other wireless devices.  If the thermostat shows poor signal strength, you 
may be able to improve the signal strength by moving the thermostat a short distance 
in any direction.

Considerations to Maximize Signal Strength:

Do not mount the thermostat 

• 

more than 30 feet from the wireless router (through no more than three 

interior walls).
Do not mount the thermostat in areas where 

• 

electromagnetic emissions from other devices, appliances 

or wiring can interfere with the thermostat’s communication. (i.e. wireless phones, security systems, wire-
less internet cameras)
Do not mount the thermostat in 

• 

recessed areas, near metal objects, or near structures. (i.e. doors, appli-

ances, entertainment centers or shelving units) 
Do not mount the thermostat closer than 

• 

2 inches to any pipes, duct work, or other metal obstructions.

Do not have 

• 

metal obstructions, concrete or brick walls between the thermostat and the wireless router 

it will be connected to.

NOTE:  See the User’s Guide for wireless setup information (weather, multi-system and remote software up-
date functionality).

Remove sub-base plate from the thermostat by in-
serting a small flat blade screwdriver into the notch 
at each of the four tabs as shown.

Gently pry the sub-base away from the the thermo-
stat.

NOTE:  This tight fit is normal and ensures that the 
thermostat is held securely to the sub-base when 
mounted on the wall.

5 FEET

[1.5 METERS]

YES

NO

NO

NO

2

1B

1A

Section 3. Physical Installation

Wireless

Summary of Contents for TZONE950AC52ZA





















Reviews: