Trane TR250 Owner'S Manual Download Page 16

16

7.  Leakage caused substantially contributed to by corrosive elements in the atmosphere (such as the 

storage of chlorine or other chemicals);

8.  Leakage caused substantially or contributed to by corrosive pool water in an acid condition (pH below 7.2);
9.  Damage caused substantially or contributed to by an external source of energy;
10. A pool/spa heater is a water containing device. Leakage of water from this device can be expected at 

some time due to malfunction or the limitations of the service life of various components.  

Do not install this product where such leakage can cause damage. MANUFACTURER IS NOT RESPON-
SIBLE OR LIABLE FOR ANY COSTS INCURRED BY SUCH DAMAGE.

IN NO CASE ARE WE TO BE HELD LIABLE FOR DAMAGE
TO SURROUNDING AREA OR PROPERTY
CAUSED BY LEAKAGE OR MALFUNCTION.

HOW TO CLAIM UNDER THIS WARRANTY: 

The original owner, upon discovering the defect, must present the included warranty claim card, complet-

ed, with proof of purchase either to the dealer or notify the manufacturer.

HAYWARD INDUSTRIES, INC.

620 DIVISION ST.
ELIZABETH, NJ 07207

www.hayward-pool.com
U.S.:  1 908 283-4897
CANADA:  1 888 238-7665

Upon receipt of such notifi cation we shall decide whether to repair such parts or replace any pool heater, 

reserving at all times the right to inspect in order to verify any claimed defect. We also reserve the right to 
have our representatives make any inspections, repairs, or to furnish replacements. This warranty is intended 
as a legally binding obligation of the manufacturer, enforceable in the courts. This warranty may give you 
specifi c legal rights which may vary from state to state.

LIMITATION ON LIABILITY: 

All intended representations have been expressly set forth in this document. This warranty may not be 

extended by oral or any other additional representations, written sales information, drawings, or other mal-
function, is strictly limited to repair or replacement of the defective heater or part, as provided herein and 
the manufacturer is not responsible hereunder for incidental or consequential or incidental costs or damages. 
The manufacturer neither assumes, nor authorizes any person or fi rm to assume for us, any further liability 
or obligation in connection with the sale, installation, use, maintenance, or existence of the heater. SAFETY 
WARNING: Pool heaters are heat producing appliances and to avoid damage or injury in the event of pos-
sible overheating of the outer jacket (1) no materials should be stored against the jacket and (2) care should 
be taken to avoid unnecessary contact (especially by children) with the jacket. When lighting a gas heater, the 
lighting instructions must be followed exactly to prevent “fl ashback” of excess gas in the heater. Electronic 
ignition heaters and electric heaters must have the power shut off when making adjustments to, servicing, or 
coming into contact with the heater. UNDER NO CIRCUMSTANCES SHOULD FLAMMABLE MATERI-
ALS, SUCH AS GASOLINE OR PAINT THINNERS, BE USED OR STORED IN THE VICINITY OF THE 
HEATER OR IN ANY LOCATION FROM WHICH FUMES COULD REACH THE HEATER. For your 
comfort, enjoyment and safety, please read the enclosed operating instructions carefully. 

MANUFACTURED FOR TRANE

®

 BY HAYWARD INDUSTRIES, INC.

2935 Sidco Dr. Nashville, TN 37204

Trane

®

 and the Trane Logo are registered trademarks of Trane International Inc.

 POOL HEATER CERTIFICATE OF LIMITED WARRANTY (CONTINUED)

© 2015 Hayward Industries, Inc.  Printed in U.S.A.

Summary of Contents for TR250

















Reviews: