Trane TR250 Owner'S Manual Download Page 15

15

POOL HEATER CERTIFICATE OF LIMITED WARRANTY

LIMITED HEATER WARRANTY 

TERMS AND COVERAGE: 

We warrant our pool heater to be free from defects in workmanship and materials under normal use and 

service. Pursuant to this warranty and subject to the Conditions and Exceptions indicated below:

 

1.  We will replace (cost of freight, installation, cost of fuel, and service labor at user’s expense) with 

the prevailing comparable model, or, at our option, repair any pool/spa heater that leaks under nor-
mal use and service within one year from the date of original installation for all users.

 

2.  In addition, we will replace (cost of freight, installation, cost of fuel, and service labor at user’s 

expense) or, at our option, repair any part or parts of the pool/spa heater which malfunctions under 
normal use and service within one year from the date of original installation for all users.

LIMITATION ON IMPLIED WARRANTIES:

 

WE ARE NOT LIABLE FOR ANY CONSEQUENTIAL DAMAGES FOR BREACH OF ANY WRIT-

TEN OR IMPLIED WARRANTY OF THIS PRODUCT. Implied warranties, including the WARRANTY of 
MERCHANTABILITY and all other implied warranties that may arise from course of dealing or usage of 
trade imposed on the sale of this heater under laws of the state are limited in duration to the term of one (1) 
year for all products when products are NOT installed and serviced by a licensed and qualifi ed pool equip-
ment professional with suffi cient experience in pool equipment installation and maintenance and adhering to 
the requirements of the jurisdiction where the product is installed. 

Warranty extends in duration to the term of (2) years for all non-ASME certifi ed products ONLY when 

products are installed and serviced by a licensed and qualifi ed pool equipment professional with suffi cient 
experience in pool equipment installation and maintenance and adhering to the requirements of the jurisdic-
tion where the product is installed. There are no warranties which extend beyond the description on the face 
hereof. We shall not in any event be held liable for any special, indirect or consequential damages. 

EXPENSE OF DELIVERY AND INSTALLATION:

Each pool heater or replacement part to be furnished under this warranty shall be furnished at our nearest 

distribution center. We shall not pay, nor be responsible for shipping or delivery charges to the place of instal-
lation, nor for labor charges or other costs of removal or installation. Every defective heater or part replaced 
under this warranty shall become our property, and as such, must be returned to our distribution center with 
transportation charges paid by the user. Any replacement pool heater furnished under this warranty shall re-
main in warranty only for the unexpired portion of this warranty. 

CONDITIONS AND EXCEPTIONS:

This warranty applies only to the pool/spa at its original place of installation and only for the original 

owner. It does not apply if the pool heater is installed in violation of any applicable code or ordinance, or is 
not installed, operated and maintained in accordance with our instructions, or is misused, damaged by ac-
cident, weather, act of God, freezing, water void and/or excess pressure, altered or disconnected. It does not 
apply with respect to:

1.  A heater not equipped with Certifi ed C.S.A. limit controls or equivalent pressure relief valve.
2.  A heater operated with settings in excess of, and/or with fuel not conforming to those shown on rat-

ing plate;

3.  A heater on which the serial numbers have been altered, defaced, or removed.
4.  Leaks arising from defective installation;
5.  Production of noise, odors, or discolored (rusty, etc.) water;
6.  Leakage substantially contributed to by sediment, lime precipitate and/or higher than normal dis-

solved solids (pH above 7.8) in the tank, copper tubes, or water ways;

(CONTINUED ON PAGE 16)

Summary of Contents for TR250

















Reviews: