32
TK 56917-11-MM-EN
Maintenance and Inspection Schedule
Routine Service and Maintenance Information
Regular inspection and maintenance will help keep the Thermo King Electric Pallet Jack Charger in top operating
condition. The following general maintenance inspection schedule is provided to assist in monitoring that
maintenance.
Interval
Inspect / Service These Items
Yearly
Inspect all mounting hardware and aluminum frame securing the EPJ Charger enclosure to the vehicle’s chassis. Tighten or
replace as necessary.
Inspect the EPJ Charger enclosure for structural damage. Repair or replace as necessary.
Inspect EPJ Charger enclosure door hinges and latch to ensure they function properly. Repair or replace as necessary.
Verify all DC battery cables are properly routed, secured and have no abrasions or damage. Repair or replace as needed.
Verify DC cable connections at rear of EPJ Charger enclosure are free of corrosion. Clean and apply additional dielectric grease and
reinstall protective cap.
Verify all AC power wires/cables are properly routed, secured and have no abrasions or damage. Repair or replace as needed.
Verify GFCI outlet inside the truck box or trailer is secured properly and has no damage. Repair or replace as needed.
Clean inverter with a damp cloth to prevent the accumulation of dust and dirt.
Confirm inverter ventilation grille openings are not blocked with dirt and debris. Clean as necessary.
Inspect all mounting hardware securing the inverter to the charger enclosure. Tighten as needed.
Confirm power inverter ground cable is secure. Tighten as needed.