24
TK 56917-11-MM-EN
If the EPJ is not being charged when connected to the GFCI outlet, check these first:
Outlet large Red Pilot light is on, small light is green.
There is power at the outlet.
•
Check for damaged extension cord.
•
Equipment may not be calling for a charge, use EPJ/equipment and
plug back into outlet.
•
Diagnose specific EPJ system concerns based on manufacturers
recommendation.
Outlet large Red Pilot light is flashing as well as the small light is
flashing red every 4 seconds.
System is in Power Save mode – power is available at outlet when
equipment that is calling for >10w charge is detected.
•
Check for damaged extension cord.
•
Equipment may not be calling for a charge, Use equipment and
plug back in to outlet.
There may be compatibility problems between EPJ and Power Save
mode.
•
Try plugging in an alternative EPJ or connect a test light (greater
than 40W) to the GFCI outlet.
•
If an alternative EPJ or test light works, assign a compatible EPJ to
the trailer or adjust mode setting to P01 or P03 if it is desired to
use the originally assigned EPJ.
Small light is flashing red every 4 seconds but Red Pilot is off.
System is in power save mode and the GFCI is tripped.
•
Press reset button for at least 5 seconds, you will feel and hear the
reset button click, release. GFCI should now be reset and both
lights flashing every 4 seconds.