12
TK 56917-11-MM-EN
Specifications
Power Inverter Specifications
Electrical Specifications
Continuous Power*
2000 W
Surge Power (Peak)**
4000 W
AC Output Voltage (12.5V)
120 VAC RMS ± 5%
AC Output Current
16.6 AAC
AC Output Voltage Range
104-127 VAC
AC Output Frequency
60 Hz ± 0.5 Hz
AC Output Waveform
Pure sine wave (<3% THD)
Optimum Efficiency
>85%
DC Input Voltage (Nominal)
12.5 VDC
DC Operation Voltage Range ***
10.2 - 15.75 VDC
DC Input Current (Full Load)
187 DCA
DC Input Current (No Load)
Mode use (P01, P03) Nominal 0.2ADC
Mode use (P02, P04) Nominal 1.30ADC
Protection
Low Voltage Alarm
12.2-12.5 VDC
Low Voltage Shutdown
10.2 VDC
Low Voltage Recovery
13.1 VDC
High Voltage Shutdown ***
15.75 VDC
Output Power Warning
Yes, with warning code
Output Power Shutdown
Yes, with shutdown code
Temperature Warning
Yes, with warning code
Temperature Shutdown
Yes, with shutdown code
Display Specifications
LED Status Indicator
Green
– inverter is operating normally.
Amber
– An amber warning light will happen often under normal
operation and should not be a cause for major concern. See
for various warning conditions.
Red
– an error has been detected and the inverter has shut down. Check
the error code on the digital display.
Digital display
Volts in, power out, error codes
General Specifications
Operating Temperature
–40F to 104F (–40C to 40C)
Inverter Weight
11.5 lb. (5.2 kg)
Inverter Size (L x W x H)
5 x 9.1 x 4.3 " (38.1 x 23.1 x 10.9 cm)
Regulatory Approval
Conforms to UL STD 458, Certified to CSA STD C22.2 No. 107.1
Complies with FCC PART 15 CLASS B
*Specifications met when DC voltage at nominal (12.5V) and temp at 25C.
**Surge ratings are based on resistive load (output voltage may drop).
***Damage can occur if input voltage exceeds 16 VDC.