background image

Page - 9

  

Pub. No. 22-5209-04

Filter/OD

Filter/OD

FILTER/OD 

- If you press and hold the filter/OD keypad button for several seconds, the dis

-

play changes to the Quick Setup option for the filter timer. Use the UP or DOWN 

arrow keypad buttons to change the timer setting if desired, 1 - 180 days.

NOTE

: Setting to 0 will disable filter timer.

- Press the filter/OD button again to return to normal 

display or just wait a few seconds and the display will 

return on its own.

Page - 16

  

Pub. No. 22-5209-04

Calibrate Outdoor Temperature

  This option allows calibration (or deliberate miscalibration) of the outdoor temperature 

sensor. The selected number is number of degrees, plus or minus, which will be added 

to actual temperature. The number can range b 5 and - 5 degrees in 1/2 degree 

increments. Factory default is 0. This adjusted value will be used and displayed as ac-

tual temperature. For example, if 2 is selected, 72 degrees actual will read 74 degrees. 

Comfort Information Drawer

 

The drawer attached to the mounting base of the control is designed to provide a con-

venient location for the user to locate their local servicer. A standard business card can 

be folded and inserted into the slot on the drawer to remind the User whom to call when 

service is required.

Features 

(cont-)

Summary of Contents for TCONT402AN32DA













Reviews: