Page - 10
Pub. No. 22-5209-04
$
$
Energy Savings
- Use this key to lower your systems energy consumption and save money at the
same time! Pressing the Energy Savings keypad button changes the indoor tem-
perature setting to a warmer temperature when the system is operating in the cool-
ing mode and to a cooler indoor temperature setting when operating in the heating
mode. Energy Savings will appear on the display.
$
Example: Heating offset of 8 degrees.
Keypad
Functions
(cont-)
Page - 15
Pub. No. 22-5209-04
Service Indicator
“SERVICE”
automatically flashes when an internal fault or error has been detected by
the control. See Table 2 on pages 20 & 21.
Wait Indicator
“WAITING”
will illuminate when the indoor setpoint is moved in the direction of call-
ing for additional system capacity.
“WAITING”
indicates that the control is adjusting to
the new settings.
Calibrate Indoor Temperature
This option allows calibration (or deliberate miscalibration) of the room temperature
sensor. The selection is the number of degrees added to actual temperature. The number
can range b 5 and - 5. Factory default is 0. This adjusted value will be used as
actual temperature for both display and control action. For example, if 2 is selected, 72
degrees actual will read 74 degrees.
