Picco R32
Inverter air/water heat pumps with axial fan
16
The ideal installation positions of the dampers for each type of machine are shown in the below images.
P1
P2
P3
P4
A
B
C
D
D
74
90
90
Ø
8,5
Models
Version
A [mm]
B [mm]
C [mm]
D [mm]
Picco R32
140 / 250
260 / 270
Standard
1410
105
235
32
Hydronic kit with tank
2180
105
80
32
5.7
ACCESSING THE INNER PARTS
5.7.1
Access to the inside of the unit on the electrical panel side
In case of maintenance and/or inspection of the compressors, it is necessary to access the inside of the unit by opening the door, located
on the front side where the electrical panel is also located. To unlock it, it is necessary to unscrew the fixing screws using the appropriate
tool and pull it towards you using the handle located under the panel. Pay attention to the electrical panel which is bound to the door itself.
For access to the panel, see the relative chapter.
The operator must pay attention to the fins of the driver which protrude from the inside and can be sharp at the edges.
Pay particular attention to any slight differences in level that may cause the door to close unintentionally, with the risk of
crushing.
Summary of Contents for Picco R32-140
Page 44: ......
