Figure 25.
Adjust height of roof by loosening screws
Loosen screws
along width of
unit for roof
height
adjustment.
Installation - Mechanical
CLCH-SVX013B-EN
21
13. Bolt the unit base frames together using bolts or
threaded rod provided (see
).
14. Use straps and come-alongs to compress the
gasketing and pull the sections together along the
height of the unit.
Note:
Wedge blocks are used to assemble shipping splits
together. Only one set of wedge blocks is shipped
with each unit. Once the shipping split has been
assembled, remove the wedge blocks and use for
the next shipping split.
Figure 26.
Shipping split assembly
Nut hex flange (HW)
Hex machine bolt
fully-threaded zinc-plated
Washer
Lifting lugs
Threaded rod
0.50-13 x 10.50
Nut
0.50-13 hex machine
Washer
0.656 ID x 1.312 OD
Wedge block for
indoor unit and
outdoor hurricane-certified unit
Leached self-driller screw
0.25-14 x 0.75
Threaded rod
0.50-13 x 10.50
Leached self-driller screw
0.25-14 x 0.75
Nut
0.50-13 hex machine
Wedge block for
outdoor
Non-hurricane unit
Summary of Contents for Performance Climate Changer PSCA
Page 81: ......
