manualshive.com logo in svg

Trane CleanEffects 32-5038-10, User'S Information Manual

Share
Download
Trane CleanEffects 32-5038-10 User'S Information Manual Download Page 10

10 

Numbers in [brackets] are for 50 Hz international systems. 

32-5038-10

User’s Information

CHANGING THE SETTINGS

While in the SET-UP mode, press the POWER button  

   once to begin cycling through the various setting 

options in the following order:

PRE-FILTER Cleaning Interval Setting 
(Figure 20)

One or more of the GREEN LED lights will illuminate.  
To change the reminder interval time, press the RESET 
button until the desired setting is indicated, and then 
press the POWER button again.  Choices are in months 
of "run time", not a calendar month.

FIELD CHARGER Power Level 
Setting (Figure 22)

One or more of the RED LED lights will illuminate.  To 
change the power level setting, press the RESET button 
until the desired setting is indicated.

To save your new settings and exit the SET-UP mode, 
press and hold BOTH the Power and filter RESET 
buttons for a minimum of 5 [6] seconds.  

G1

G2

G3

Y1

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

G1

G2

G3

Y1

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

G1

G2

G3

Y1

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

One Month

[5 Weeks]

Two  Months*

[10 Weeks]

Three Months

[15 Weeks]

Fig. 20

G1

G2

G3

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

G1

G2

G3

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

Y1

G1

G2

G3

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

Y1

Y1

G1

G2

G3

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

Y1

Two 

Months

[10 Weeks]

Four 

Months

[20 Weeks]

Six 

Months*

[31 Weeks]

Nine 

Months

[46 Weeks]

Fig. 21

G1

G2

G3

Y1

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

G1

G2

G3

Y1

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

G1

G2

G3

Y1

Y3

Y4

R1

R2

R3

Y2

CLEAN

DIRTY

Minimum

Medium

Maximum*

Fig. 22

* Factory settings

FIELD CHARGER Power Level Set-
ting

The RED LED lights are used to set the power level 
of the FIELD CHARGER for maximum, medium, or 
minimum.  The number of illuminated RED LED lights 
indicates the current setting as shown in Figure 22.  The 
factory setting is for maximum.  

Lower settings will reduce the slight sound emitted by 
the unit with minimal loss of air cleaning efficiency, if 
desired.  

The U.S. Food and Drug Administration recommends 
indoor ozone concentrations should not exceed 50 parts 
per billion.  Your air cleaner will contribute a negligible 
amount of ozone - less than .3 parts per billion to the 
living space.  

COLLECTION CELLS Cleaning 
Interval Setting (Figure 21)

One or more of the YELLOW LED lights will illuminate.  
To change the reminder interval time, press the RESET 
button until the desired setting is indicated, and then 
press the POWER button again.

Summary of Contents for CleanEffects 32-5038-10













Reviews:

No comments

Brands by name

Popular brands

Load more brands