Insulating Layer for the Condensate Pipe
Pipe Li
p
Thermal Insulation of the Condensate Pipe
CAUTION
Seal properly and verify there is no water leakage from the joint of the condensate pipe.
Failure to do so may result in equipment and/or property damage.
Be sure to secure with a clamp and insulate completely to avoid condensate build-up.
Insulation of the Condensate Pipe
Precautions for the Drain Pipe
The installed height of the lift pipe should be less than 11 inches (280mm). It is recommended to
set an inclination angle of 1~2° for the lift pipe toward the drainage direction. If the lift pipe and
the unit form a right angle, the lift pipe must be less than 11.8 inches (300mm) from the unit.
Drain hose
(
attachment)
Within
/ 11.8 in
300mm
Roof
Drain raising hose
220 mm/8.6 in
39.4-59in
1-1.5m
Hoisting stand
Less than 11in(280mm)
Below
19.7in
500mm
Ceiling
Clamp
(
attachment)
14
Cassette Unit