34
TK 56403-2-IM-EN
3. T
Ta
an
nkk S
Sttrra
ap
pss - Insert 1/2-13 (M14 x 2) with 1/2 in. (M14) lock washers and 1/2 in. (M14) flat washers through the L-end
of each tank strap.
N
No
otte
e:: Rubber strips must be in place on the tank straps to prevent the metal straps from chaffing the aluminum tank.
a. Thread the 4 bolts into the holes in the container body.
b. Torque hardware to 81 N•m (60 ft-lb).
4. Align each tank strap end mount with the holes in the lower strap mounting plates:
a. Insert 1/2-13 (M14 x 2) x 5.5 in. (140 mm) long bolts with 1/2 in. (M14) lock washer, 1/2 in. (M14) flat washers and
spacers through each strap end mount.
b. Position this assembly over the holes on the horizontal bar of the DRC cage. Thread the bolts into the holes in
the DRC cage.
c. Tighten the bolts once to 20 N•m (15 ft-lbs) and stop.
d. The straps and rubber strips should only be snug enough to the tank to keep it from moving.
