30
TK 56403-2-IM-EN
4. Install the provided brass hose fittings over the fuel lines and tighten the compression nut securely.
1
Compression Nut
2
Compression Ring
3
Compression eyelet
4
Compression fitting body
a. Disassemble the hose fitting as shown above.
b. Take the applicable fuel hose, loosely install the first compression nut and compression ring. Install the
compression ring so that the longest sloping face of the ring faces away from the nut.
c. Insert the compression eyelet into the tube flush.
d. Securely push the fuel hose into the compression fitting body.
e. Make sure the fuel hose is completely installed into the fitting body before tightening the compression nut.
N
No
otte
e:: It is critical to avoid over-tightening the nut or else the integrity of the compression fitting will be
compromised, causing a leak.
f.
Take the applicable fuel extension hose and repeat steps a - e with the other side of the compression fitting.
g. Your fuel line now should be extended in order to route to the fuel tank.
5. Repeat step 4 for the second fuel line.
6. Route the fuel lines below the compressor and route to the fuel tank.
