6
BAS-SVP046A-EN
Communication Setup and Configuration
The Symbio
™
800 controller can be factory ordered with a specific protocol configuration and
rotary address setting. If communication options were not specified, the Symbio
™
800 controller
will be setup for BACnet MS/TP communications at 76,800 bps with a rotary address setting of
000.
Figure 1. Symbio
™
™
800 rotary address and service tool port
Service Tool for Symbio
™
™
800 Configuration
The service tool used to modify the Symbio
™
800 controller is a standard web browser. The
Symbio
™
800 webpage is accessed by using a standard USB type A/B cable. Connect the USB
cable between a laptop and the service tool port on the Symbio
™
800 controller (shown in
).
