Installation - Mechanical
CLCH-SVX009J-EN
21
FC Fan Size 12-30
1. Remove drive side screws on isolator brackets
2. Cut banding and remove
Direct-Drive Plenum Fans
1. Remove two screws on the motor side of the fan
assembly.
2. Remove tie-down.
Skid Removal for Indoor Units
Indoor units ship on a skid that provides forklift locations
from the front or rear. The skid allows easy
maneuverability of the unit during storage and
transportation. Do not use the skid tie down for lifting. Do
not remove the skids until ready to place the unit in its
permanent location.
Figure 9.
Shipping tie-down removal for FC fan 12-30
Figure 10.
Shipping tie-down removal for DDP fan
See Detail B
Detail B
See
Detail C
Detail C
NOTICE
Equipment Damage!
Premature skid removal could result in equipment
damage. Keep skid in place until unit is ready to set. Do
not move the unit or subassembly without the skid in
place as shipped from the factory.
WARNING
Risk of Unit Dropping!
Improper use of the tie down brackets could result in
unit dropping and crushing technicians which could
result in death or serious injury, and equipment
damage. Do not use skid tie down brackets to lift the
unit.
Figure 11.
Do not use skid tie down for lifting
