www.FX-Products.com
Page
6
of
7
Rev 010518
4.
Attach the Bumper to Mounting Brackets with the hardware. Attach the Towing Hooks to the Mounting Brackets (Fig 10).
Level and adjust the bumper and fully tighten all hardware.
5.
Reinstall the factory wiring harness to the fog light.
6.
Level and adjust the bumper, make sure that all hardware is secure and tight.
7.
Installation is finished, pick up all tools.
Fig 10
(3)12×40mm Hex Bolts
(6)12×37×3mm Flat Washers
(3)12mm Lock Washers
(3)12mm Hex Nuts
(2)12×60mm Hex Bolts
(4)12×37×3mm Flat Washers
(2)12mm Lock Washers
(2)12mm Hex Nuts
