www.FX-Products.com
Page
5
of
7
Rev 010518
2.
Attach the license plate to the Replacement Bumper
(Fig 8)
. Fasten the license plate with the hardware.
3.
Attach the Mounting Brackets (left and right) to the frame
(Fig 9)
. Do not fully tight the hardware at this time.
Fig 8
(1)5mm Lock Washers
(1)5×15×1.2mm Flat Washer
(1)5mm Hex Nut
(1)5×15×1.2mm Flat Washer
(1) 5×20 Phillips Screw
Fig 9
(1)12mm T-Bolt
(1)12×37×3mm Flat Washer
(1)12mm Lock Washer
(1)12mm Hex Nut
(1)12×140mm Hex Bolt
(2)12×37×3mm Flat Washers
(1)12mm Lock Washer
(1)12mm Hex Nut
