SENSITIVITY SETTING
Detection Mode
PIR is hardware-based biomass detection.
SOFTWARE use
s
advance software analysis to trigger motion alarm.
In general, the performance of any PIR depends on the environment,
e
specially the temperature.
At low temperature the accuracy of PIR may suffer. If you are experiencing
this
, please switch to
the built-in software motion detection to improve
performance
.
Motion Detection (available for Software Mode ONLY)
HIGH – Suitable for detecting smaller object(s) within 5 to 6 meters
LOW – Suitable for detecting larger object(s) within 3 to 5 meters
Note:
The HIGH/LOW setting for Motion Detection only takes effect when
the
user chooses
SOFTWARE in detection Mode.
There are 'Day' & 'Night' settings (Lower settings are
recommended for 'Night').
2
6
This defines the camera parameters for motion detection.
