ADMIN PASSWORD
The Admin Password is a specific
password
to enable
the
administrator to change the advanced
settings.
The default Admin password is 123456.
Please use this function to change the default
A
dmin password to your personal
A
dmin password.
For the protection of your system configuration, every time you change the advanced settings,
you
will
need to enter the
A
dmin password. Please change the
A
dmin password periodically.
Note:
If you forgot your
A
dmin password, please
'
long press
'
the reset button on the camera DC
jack for 5 seconds to restore the password into factory default value 123456 (please refer
to the Camera Overview section). All settings will be restored to factory default. You will
need to configure your camera from the start.
PUSH NOTIFICATIONS
The camera supports a motion detection function, which is capable of detecting movements within
the camera view, followed by a push notification to the user(s), the system can also begin recording
to an internal micro-SD card
(if installed).
When motion detection is enabled and system detects movement:
- System will begin recording.
- With Push Notification enabled, the system will send out a notification message to the user’s
mobile device
(s).
Function
Setting
Action (when movement is detected)
Push Notification
ON
Camera: Start video recording
Mobile Device: Text notificationMotion
Detection
OFF
Camera: Manual Recording Mobile
Device: No action
2
3
