Trailer Vision Recorder-Cam, Instruction Manual

Page: 7 / 28

7
Windscreen Outside
DVR body
Double-sided
Adhesive tape
Interior Mirror
1. As shown, in the figures above, position the unit so that it does not obstruct the drivers view
and at the same time, the lens viewing angle does not overlap any tinted section.
2. Once the unit has been installed, ensure that it’s horizontal, so that the best possible images
are obtained during recording.
Keep horizontal
Car Bus or Truck
DVR body
Double-sided
Adhesive tape
Keep horizontal
Tinted section
If installed in the centre of the windscreen, in front of the rear-view mirror, optimal recorded images
can be obtained.
Rearview mirror Forward
How to Install
Recommended Installation Location
If you are unable to install, as above, the unit can be installed to the left or right side
of the rear-view mirror. However, please install the unit as close to the middle of the
vehicle as possible, otherwise the recorded images may not be central.
Windscreen
Tinted
section
Interior
Mirror
Inside
Outside
Inside