10
* Recommended Position of Installation
Tin
ted sec
tion
GPS an
tenna
Connection with the GPS Antenna
V-OUT (optional) Connection
If a V-OUT cable (optional) is used to connect the unit to a monitor, real-time recording will function
and recorded images can also be viewed. (Video Output activated only / Audio Output disabled).
When connected to the GPS antenna, it is possible to record the received data, including route, speed,
time, direction and location information.
It is recommended that the GPS antenna is installed at the top corner of the windscreen, where there
is no radio interference and at least 30cm from other equipment such as the DVR body, or any Sat-Nav
units etc.
* GPS Antenna
* V-OUT
connection
* Only use the included cable. If any other cable is used, the unit/monitor may not operate correctly.
* Connect to monitor video input.
Video input (monitor)
V-OUT cable
Install the “GPS” aerial facing
upwards.
* The connection terminal may be different depending on the type of monitor; in this case
the user should 1purchase/utilise an adapter.
The GPS signal reception could be adversely effected by window tinting or any
coating material. It is not a product fault, the problem is caused by the metal
component in the glass/coating; if required, install the antenna externally.
* Please refer to page 9 for cable arrangement.
Position GPS antenna so that it does
not overlap any tinted section.
Summary of Contents for Recorder-Cam
Page 28: ...INSTRUCTION MANUAL...
