2) If using the suction cup mount:
2. How to mount the brackets:
Touch-Switch is
directly above
There
are
3
types
of
mounting
brackets
to suit.
1.
The
Monitor
mounts
can
be
attached
to
a
air-vent,
dashboard,
or
windscreen.
1)
The
factory
default
dash mount sticks
on
to
the
dash
board:
Choose
and
clean
a
suitable
place
on
the
dash
board,
remove
the
sticky
tape backing and press
the
stand
mount
on
to the
dash
board.
Use
suction
cup
mount
to
replace
the
default
stand
with a
screwdriver.
Choose
a
suitable
place
on
the
windscreen,
and
mount
the
suction
cup
mount
to
the
windscreen.
With
the
suction
lever
in
the
released
position,
press
the
suction
cup
against
the
windscreeen.
Press
the
suction
lever
toward
the
suction
cup
to
lock
the
mount.
To
adjust
the
angle
of
monitor,
loosen
the
ball
joint collar,
retighten
in
the
desired
position.
3)
The
monitor
can
be
mounted
on
the
air
vent
of
the
air
conditioner, which
can
avoid ‘traffic
violations’
(some
countries
traffic
laws
do
not
allow
installation on
the
windscreen
or
center
console, as it
may
block
the
driver's
view
- in the UK please do not install within the sweep of the windscreen
wipers):
3.
Connect
the
cigarette lighter power adapter to the monitor.
