Towbar Fitting Instructions
To Suit
HONDA CR-V RW CL4
Part Number
QTHN454L
Rating
1500/100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9898 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
Rev: A Page 6 Issue Date:
04/04/2018
10. Using the 5 x location marks shown on the
rear panel chassis opening, drill 5 x 14mm
holes to remove metal sheeting.
Once cut, clean any burrs or sharp edges
using a file.
11. Insert spacer plate into LHS chassis rail
opening (now cut) along the LH face of
chassis.
Hold spacer in place by partially pushing M10
x 35mm bolt complete with 1 x M10 washer
plate from outside chassis rail into chassis.
12. Insert LH side arm (refer to exploded view)
into chassis rail. Align nut on the sidearm with
the spacer plate previously inserted (Step 11)
and loosely secure with the M10 bolt partially
inserted.
Repeat steps 11 and 12 for RHS.
