Towbar Fitting Instructions
To Suit
HONDA CR-V RW CL4
Part Number
QTHN454L
Rating
1500/100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9898 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
Rev: A Page 8 Issue Date:
04/04/2018
16. Identify the centreline of the inside of the
bumper. Mark and cut a 90mm wide by 70mm
long rectangle, as measured from the bottom
edge of the bumper.
Remove any burrs after cut.
17. On the cover removed in Step 8, identify the
slot allocated for the factory tow hook. Mark
and cut a 90mm wide by 90mm long square,
as measured from the bottom edge of the
cover near the slot.
18. Mark out and drill 2 x
ø
5mm holes 69mm apart
on bumper skin to support plug bracket.
19. Reinstall bumper and components following
Steps 1
– 8 in reverse (excluding Step 7).
90mm
70mm
90mm
90mm
