3
A
A
A
B
B
ATTACHING THE FLUE PIPE AND CHIMNEY CAP ASSEMBLY
1. Align the holes in the Flue Pipe(4) with the holes in the Flue Pipe Gasket(5),
which fits between the right end of the Grill and the Flue Pipe(4). From the Hardware Kit,
Bolts(A) and insert the Bolts through the holes in the Flue Pipe(4) and the Flue Pipe
Align the Bolts with the corresponding holes in the Grill. Flange Nuts (B)
Tighten with Flange Nuts(B) by special handle provided. See Figures as below.
POSITIONING THE V-SHAPED GREASE DRAIN PAN SUPPORT
1. Install V-Shaped Grease Drain Pan Support inside the Wood Pellet Grill using Bolts(A) and
Flange Nuts(B). Securely tighten. See Figures as below.
B
A
A
B
B
5
4
6
