Tractive Pentruder 3P8 Operator'S Manual Download Page 39 | Manualshive

Page: 39 / 44

background image

Operators Manual - High Frequency driven Pentruder 3P8 Wire Saw

Pentruder - Stronger than ever! Applying Standards That Are Years Ahead Of the Competition.

Tractive AB 28 January 2009 Page 39

The Connector System Kit:

•

Specially developed software using interference tolerant CAN-bus communication
between machine(motor and power pack.

•

Upgrade for the control card in the Pentpak HF power packs. (All existing control cards
can be upgraded)

•

Software to run various motors and machines. Any mix of motors and type of machine
is now possible. (An 18 kW PP can not drive a stronger motor than 18 kW, and a
PP422 can not drive the 27 kW motor, but a PP422 can drive the 22 kW motor and the
18 and 15 kW motors. The PP427 can drive all motors.)

•

One HF-motor ID-chip that tells the power pack what motor it is.

•

One chassis ID-chip that tells the power pack what type of machine it is.

•

4 new connectors for the 400V 400Hz power. All housed in very sturdy high grade thick
wall alloy housings.

•

4 new connectors for the 24V DC feed and travel motors. Also these are very rugged
items, designed to withstand the hard environment.

•

3 alloy adapter plates to upgrade existing power packs and HF-motors with new
connectors.

•

All equipment, tools, wires, fittings, seals, O-rings, grommets, spare parts, etc., needed
to install the new system.

In addition to that, a SUD-unit, Software Upgrade Unit is needed to do future software
upgrades. This is an electronic unit specially designed to easily upgrade any power pack with
new FREE field upgradeable software versions (not functionality) without need for bringing it
back to their dealer for service.

To upgrade existing power packs, and to do future upgrades with new software, a SUD unit is
needed.

To add functionality for a certain type of machine, for example to add software for a wire saw,
is not free, but upgrades with new program versions are. The salesman or technician can use
the SUD device to plug into the Power pack, stick a USB-memory into the USB-port on the
SUD, and the rest is automatic. New software is easily downloaded from the Tractive web-
site. Unlock codes for new functionality will make it easy to unlock functions in the Power
pock without returning the PP's to your dealer for service .

«
...
37
38
39
40
41
...
»

Summary of Contents for Pentruder 3P8













































Reviews:

No comments

Related manuals for Pentruder 3P8

Brand: Barranca Diamond Pages: 36

Brand: Avid Power Pages: 16

Brand: Parkside Pages: 94

Brand: GreenWorks Pages: 32

Brand: Grizzly Pages: 80

Brand: Makita Pages: 68

Brand: tigair Pages: 7

Brand: Matrix Pages: 43

Brand: Matrix Pages: 142

Brand: Craftex Pages: 40

Brand: Milwaukee Pages: 17

Brand: Milwaukee Pages: 25

Brand: Milwaukee Pages: 41

Brand: Worx Pages: 14

Brand: Worx Pages: 48

FATMAX FME721-QS

Brand: Stanley Pages: 156

Brand: Univent Pages: 22

Brand: Elu Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands