Operators Manual - High Frequency driven Pentruder 3P8 Wire Saw
Pentruder - Stronger than ever! Applying Standards That Are Years Ahead Of the Competition.
Tractive AB 28 January 2009 Page 19
7. Attach the main drive HF-motor to the pulley assembly
Attach the HF-motor to the pulley assembly by entering the locator dowels in to the holes in
the pulley assembly plate. Tighten the lock screws with an 8 mm allen key / 5/16”. Rock the
main drive pulley slightly back and forth to make the spline shaft mesh with the hF-motor.
8. Attach the upper magazine assembly
Attach the upper magazine assembly by sliding the assembly sideways onto the locator studs
on the upper carriage. Use the lower four studs. Tighten the QDC lock bolts firmly, but do
NOT over tighten!
