Copyright © 2012 Tractive Technology, LLC. All rights reserved.
Page 6
Accelerator Pedal Position Sensor - Installation
View from under sensor w/plug attached View of wires (#2 & #5) w/RED or GREEN used
WHITE w/brown #5
BROWN w/white #2
CAUTION
: The wires in the schematic are NOT in the
pictured
order as
physically
in the Viper. Wire#2
(BN/wh) & Wire#5 (WH/bn) are your Pedal Position
Sensor #1 and #2 signals. These are shown above in
the picture in actual physical positions.
You can attach
RED -or- GREEN to either.
