10
•
Install the tension meter on the wire rope (ref to § 6.1).
•
Screen will display (ref to § 5.3) :
o
Current measurement units
o
Current temperature
o
Battery level of charge
o
Measured effort
Note: MIN = effort below the measurement range of the selected cable
MAX = effort above the measurement range of the selected cable
6.1. To install the tension meter on the wire rope
•
Use the crank in order to unscrew the tightening screw
•
Place the two sheaves onto the wire rope
•
Use the crank to tight the tightening screw until the wire rope gets in firm contact with the
rotary stop block
Once the cable is in contact with the rotary stop block, confirm with a ¼ of turn
without forcing it.
Excessive torque may damage both screw and wire rope and will affect the
precision of the measure.
