15
Arsenometer HMAS100
Instruction Manual v2.0
Electrodes
The Arsenometer is designed to be used out of the box. The electrodes are all pre-fitted.
Setting up the Arsenometer
The Arsenometer comes with three electrodes. The electrodes are
WE2 (Working Electrode 2), R (Reference) and C (Counter). The
electrodes are connected to the Sonde as follows:
To fit the electrode simply align the arrow on the
electrode with the arrow on the sonde head and
push the electrode. A quiet double click should be
heard. Gently pull on the top of the black holder of
the electrode to ensure it is fully connected
To remove the electrodes pull back the connector
shroud with the arrow on and the connector will pull off.
When attaching or removing electrodes be
careful to avoid touching the stirrer
To correctly identify electrodes, the Sonde
has the electrode letter reference stamped
into it..
Electrode WE2 (3 pins) is to be fitted in position
WE2.
Do not mix up the electrodes.
