11
Arsenometer HMAS100
Instruction Manual v2.0
2.2. GETTING STARTED
Charging the battery
When you first receive your Arsenometer it would be advisable to fully charge
the battery. This can be done several ways using the USB lead and
chargers provided with the kit. If a computer is used the software drivers will
need to be installed to perform a fast charge. Refer to section on software
installation.
Unscrew the blue cap Insert mini USB lead Tighten the screw cap
Connect to chosen charge system (Computer/ Mains/ 12V)
The Arsenometer is capable of charging at a fast rate taking approximately 7
hours to fully charge the battery, or a trickle charge rate which should be
used for overnight top up charge if the instrument is only used once or twice
a day.
From the system menu select Charge and you will be given three options:
100mA Trickle charge rate
500mA Fast charge rate
AUTO The instrument will automatically select the best charge rate.
