Copyright
Trace Engineering Co., Inc.
Telephone (360) 435-8826
Part Number 3471
5916 195th Street, NE
Fax (360) 435-2229
Released: Thursday, April 29, 1999
Arlington, WA 98223 USA
PM DR 175/250 Dual Diagram
4-9
PM DR 175/250 Dual Assembly Sequence
1.
Feet
2.
edge guards
3.
C40 (if equipped)
4.
neutral and ground bonding block (left panel for SW, right panel for DR)
5.
DC bonding block (left for DR, right for SW)
6.
DC shunt
7.
DC bus bars
8.
DC175/250
9.
DC20/60/110
10. IOX60
11. any additional AC or DC breakers
12. Slider
13. Cover
14. connect ground conductors
15. AC output cables
16. AC neutral cables
17. DC cables
18. Decals
19. Lid
20. Door
Remove appropriate component instruction sheets and arrange in order of
installation. Gather all tools and components listed in the instructions and place then
nearby. Prepare components as instructed on the component assembly pages and
set aside. When all cables, components, fasteners, etc. are prepared and handy,
assemble each component in the sequence shown above, referring to the component
assembly instructions as required. Invert PM to install feet.
