Printed in the Federal Republic of Germany
TR-Electronic GmbH 2019, All Rights Reserved
01/17/2019
TR - ECE - BA - DGB - 0146 - 00
Page 45 of 47
5.2.5 User data content
Selection
Description
Default
Position
The user data is output as position value
x
Velocity
the user data is output as velocity value
5.2.6 Data code
Selection
Description
Default
ASCII-HEX
User data is transferred in ASCII HEX characters
x
ASCII-Decimal
User data is transferred in ASCII-Decimal characters
Binary-HEX
User data is transferred in Binary-HEX characters
Binary-Decimal
User data is transferred in Binary-Decimal characters
5.2.7 Number of signs
Selection
Description
Default
4
4 signs are transferred with one message
5
5 signs are transferred with one message
6
6 signs are transferred with one message
x
7
7 signs are transferred with one message
8
8 signs are transferred with one message
5.2.8 CRC (Checksum)
Checksum for error detection from the exclusive-or linked user data of the active
signs. Depending on the number of the set signs in chapter 5.2.7 "Number of signs".
Selection
Description
Default
on
CRC checksum is used
x
off
CRC checksum is not used
5.2.9 CR (CarriageReturn)
Selection
Description
Default
on
Carriage return is used
x
off
Carriage return is not used
