27 |
Scan with logging
1.
Select Log in the batch menu and press OK. The available batches display.
2.
Use the arrow buttons to select a batch. The batch menu displays.
3.
Select Scan in the Main Menu and press OK.
4.
Press the SCAN button briefly to make a single measurement or hold the SCAN button down to take
multiple measurements. The scan results for the activated scan angles are displayed.
The device stops scanning as soon as the scan button is released.
Each log record is assigned a log number that is displayed at the top of the screen next to the batch number/
name. The log record contains the measurements for the activated scan angles. If scan limits have been set
for a scan angle (see section 6.2), the Glossmeter also shows whether the measurements are within ( ) or
outside ( ) the scan limits.
Immediately view measurement data in the batch
If the batch contains multiple measurement, you can use the two red arrows in the bottom-left corner to
scroll through the measurements.
1.
Use the arrow buttons
to select one of the red arrows, depending on whether you want
to scroll up or down in the batch.
2.
Press the OK button to display the previous/next logged measurement in the batch.
10.2 Scan Limits
Use this option to set and activate scan limits for the selected batch.
See section 4.1 for more information on:
•
Activating/deactivating scan limits
•
Setting a scan limit range
10.3 Statistics
Select Statistics to evaluate the measurements in the selected batch. You can view the following statistics:
minimum values, the maximum values, the averages, and the standard deviation for each scan angle.
1.
Select Statistics in the batch menu and press OK. The minimum and maximum measurements display.
2.
Press the Down button to select <11setup icon.jpg> in the bottom-left corner.
3.
Press OK to display the averages and standard deviation for this batch.
4.
Press OK again to switch back to the minimum and maximum measurements.
Summary of Contents for GLOSSMETER GL0010
Page 32: ...32 www tqcsheen com...