| 22
3.
Use the arrow buttons to select the scan angle for which you want to set a scan limit range and press
OK. The corresponding settings display.
4.
Select Scan Limits and press OK. The status changes to “On” or “Off”, depending on the current setting.
Set scan limit range
1.
Select Scan Setup in the Main Menu and press OK.
2.
Select Scan Limits and press OK. The scan angles, the scan limits, and their status display.
3.
Use the arrow buttons to select the scan angle for which you want to set a scan limit range and press
OK. The corresponding settings display.
4.
Use the arrow buttons to select Min. or Max. and press OK. The limit is now selected.
5.
Use the arrow buttons to adjust the limit:
•
Press the arrow buttons briefly to increase or decrease the limit in steps of 1.
•
Keep the arrow buttons pressed down to increase or decrease the limit in steps of 10.
6.
Once the correct limit has been reached, click OK.
If scan limits have been set for a scan angle (see section 6.2), the scan results displayed by the Glossmeter
also show whether the measurements are within or outside the scan limits.
Scan limits are set for scanning without data logging but can also be set for batches. For more information
see section 6.2.
8.2 Geometry
Use this menu option to select the scan angles for your measurements. Based on the version of the TQC
Sheen Glossmeter you are using, you can choose one, two or three scan angles.
Figure 4-3 Geometry screen with 60° angle selected
Activate/deactivate scan angle
1.
Select Scan Setup in the Main Menu and press OK.
2.
Select Geometry and press OK. The available scan angles display.
3.
Use the arrow buttons to select the scan angle you want to activate or deactivate
4.
Press OK to change the current status. The box to the right of the scan angle changes to either checked
or unchecked, depending on the current status.
Note that different scan angles are used for different surfaces. The 60º angle is the reference angle and can be
used for every surface, from matte to mirror finish. The 20º scan angle achieves the best results on high-gloss
Summary of Contents for GLOSSMETER GL0010
Page 32: ...32 www tqcsheen com...