Operation and Installation Manual
KRT2 VHF-Communication Transceiver
Doc.-No: KRT2.A-MAN.en
Rev. 0101
Page
38
6.9 Wiring
6.9.1 Wire Gauges
Supply lines (Power, GND): AWG20 (0,61 mm²)
Control lines: AWG22 (0,38 mm²)
All wires must be aviation certified.
6.9.2 Connector Pin-Configuration
Figure 7: Connector pinout
If manual intercom is not used, pin 12 should be grounded (Batt. Minus).
Figure 8: Remote control pinout
