Operation and Installation Manual
KRT2 VHF-Communication Transceiver
Doc.-No: KRT2.A-MAN.en
Rev. 0101
Page
14
3.2 Display
Indication
Meaning
Remark
RX
Reception
RX is displayed during reception (squelch
opened)
TX
Transmission
Transmitter operates normally
Te
Transmitter was turned off automati-
cally after 2 min continuous operation
119.700
Frequency
ZELL SEE
Frequency station identifier
Displayed when frequency and identifier are
stored in the favourite list
MUC IN
Standby frequency station identifier
Displayed when frequency and identifier are
stored in the favourite list
VOL ……
Receiver volume level (default after a
certain time delay)
When AUD is pressed the corresponding Audio
Menu item and setting is displayed
DUAL
DUAL function is activated
DUAL function is deactivated by DUAL, FREQ or
MEM
[03] (MEM)
Favourite list index (0-99)
When frequency and identifier are stored at this
index ex:[03] they are displayed
125.100 upper Active frequency
Displayed in large fonts.
125.800 lower Standby/DUAL - frequency
Displayed in large fonts.
<
The pointer indicates what the turning
knob will change VOL SQ VOX…..etc.
Standby frequency
Arrow is positioned according to the button
pressed (AUD or FREQ)
BAT
Supply voltage is low <10,5V
Low or defective battery / generator.
A-match
Antenna error
Bad antenna match
a v e
Status of certain Audio menu func-
tions
a = AUX. Input active
v = VOX active
e = external Intercom switch active
Table 5: KRT2 Display
