Operation and Installation Manual
KRT2 VHF-Communication Transceiver
Doc.-No: KRT2.A-MAN.en
Rev. 0101
Page
17
4.3 Frequency selection
There are two different frequency selection methods:
•
Direct Input
•
Selection from the favourite list (index 0-99)
4.3.1 Direct frequency selection
The Standby-Frequency is set with the turning knob in 3 different ranges. The selected range is high-
lighted and can be changed with the FREQ button. Frequency ranges are:
1
xx.
nnn
1nn
.x
nn
1nn
.
n
xx
Press the FREQ button once or several times until the desired frequency range is highlighted. The
unselected digits are displayed as dotted digits.
When the pointer is not next to the Standby Frequency window, it
will be repositioned with the first pressing of the FREQ button.
Exchanges the Active and Standby frequencies.
When the Exchange button is not pressed, the Standby frequency display will return to its normal ap-
pearance after 20 seconds.
