TQ Aviation
KTX2-F.0100
EASA.AP445
MAN
KTX2-F.A-MAN.0001.docx
Page 34 of 74
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
While editing pressing the “IDENT” button briefly will cancel the current editing. The previous
configuration value is restored.
While in a submenu pressing the “IDENT” button briefly will return to the previous menu.
Pressing the “IDENT” button for at least 3 seconds will discard any unsaved changes and return to the
main setup menu.
3.4 Setup Menus
3.4.1 Brightness
To change the display brightness select “Display” and press the rotary knob.
Turn the rotary knob to change the value for brightness between 1 (lowest) to 5 (highest). Press the
rotary knob to save the new value.
Figure 19: Setup Brightness Menu
3.4.1.1 Button Config
To change the button illumination select “Button Config” and press the rotary knob. A menu for
configuring the button illumination and its modes is displayed.
The button illumination has three (3) modes: Off, On and Auto.
To change the mode select “Mode” and press the rotary knob. Turning the rotary knob will change the
mode. Press the rotary knob again to confirm the mode.
Depending on the selected mode several parameters can be configured.
3.4.1.1.1 Button Illumination Mode “Off”
If this mode is selected the button illumination is switched off. No further parameters can be configured.
