manualshive.com logo in svg

TPS WP-84, Manual, Page: 29 / 42

Share
Download
TPS WP-84 Manual Download Page 29

Page 29

10.6 Data Format

Data is returned to the RS232 port by the 

WP-84

 in the following format. Please

note that a “

ss

” shown anywhere in this section denotes one space.

LLLL

ss

DDDDDDUUU

ss

TTTTTToC

ss

ss

dd/mm/yy

ss

hh:mm:ss

where…

LLLL

is the Log Number. Maximum 4 characters, right justified.

A Zero is sent for instant readings (section 10.2).

DDDDDD

is the Conductivity or Salinity Data. Maximum 6 characters, right
justified.

UUU

is the Conductivity/Salinity unit description, either “

uS

ss

”

,

“

mS

ss

”

, “

ppM

” or “

ppK

”.

TTTTTT

is the Temperature Data. Maximum 6 characters, right justified.

oC

is the Temperature unit description.

dd/mm/yy

is the date, month and year data.

hh:mm:ss

is the hours, minutes and seconds data.

Notes

When requested by a PC with the ?D or ?R commands (section 10.5), each line of
data is terminated with a carriage return.

When the data is sent by the 

WP-84

 using the Print function (section 8.4) or Send

function (section 10.2), each line of data ends with a carriage return and a line
feed.

Summary of Contents for WP-84











































Reviews:

No comments