manualshive.com logo in svg

TPS WP-84, Manual, Page: 28 / 42

Share
Download
TPS WP-84 Manual Download Page 28

Page 28

10.5 Commands

The following commands can be sent from a PC to the 

WP-84

. Note that <cr>

denotes carriage return and <lf> denotes a line feed.

Action

Command

Notes

Request current data

?D<cr>

Returns the current Conductivity/
Salinity, Temperature, date and time
from the 

WP-84

. The log number

returned is set to Zero.

Request logged data

?R<cr>

Returns all logged records from the

WP-84

 memory. The data ends with the

message 

ENDS

<cr>

Erase logged data

?E<cr>

Erases all logged records from the

WP-84

 memory. Returns the message

ERASED

<cr> to confirm that the

records have been erased.

Request status
information

?S<cr>

Returns the model name, firmware
version number, instrument serial
number and number of logged readings
in memory,
eg: 

WP84

ss

ss

V2.0

ss

S1234

ss

9999

<cr>,

where 

ss

 are spaces. Note that the

number of logged readings is right-
justified.

Request GLP
information

?G<cr>

Returns all calibration GLP information,
plus the instrument model and current
date (see section 10.6 for data format
and hand-shaking).

Summary of Contents for WP-84











































Reviews:

No comments