20
6. Maintain daily and safety instructions
Avoid to put scale in wet or dusty environment. Be careful that AC power cable should
not be placed in traffic rout or direct sunlight.
Avoid to put the heavier object than defined capacity on the scale, if this happens ,
message “OL” will appear on weight window and a beep sound will be hear, you should
immediately pick the heavier object up to avoid any damage to device. Don’t put the heavier
object than defined a capacity on the scale in off time too.
Not to use display pole for scale transport, if the scale pole broken, please don’t turn
on the scales for using.
To use battery, it is necessary to charge it for 24 hours in first time, and can repeat this
action every one month.
Please don’t use other power adapter for protecting and extending the battery life.
Normally the battery life on year, if you need to change the battery, please make sure
replace the same standard battery.
While working with scale, use AC power to charge internal battery and able to use in
necessary time.
Please don’t use cleanser multi-material or cleanser grater tools. Chemical
composition of these materials may destroy the scales surface. You can clean the scales by
the clean napkin or special spray.
Please don’t clean the scales or pan by aqueous
ammonia or diluents. Please clean the scales by producer and use the suitable
cleanser.
If the scales have fault, please try to turn it on and off. Then pick off the pan and turn
again, or check the scales by manual as following chapter 6.
