manualshive.com logo in svg

TPS 125190, Handbook, Page: 7 / 35

Share
Download
TPS 125190 Handbook Download Page 7

 

Page 7 

1.3 Specifications 

Probe Type ...........................High sensitivity 90

O

 probe is standard. 

Wide range 180

O

 retro-scatter probe is optionally 

available. 

With High Sensitivity 90

O

 Probe 

Ranges*................................0 to 30.00 NTU 

0 to 300.0 NTU 
0 to 3,000 NTU 

Resolution ........................................0.02 NTU 

 0.1 NTU 
 1 NTU 

With Wide Range 180

O

 Probe 

Ranges*................................0 to 30.00 NTU 

0 to 300.0 NTU 
0 to 3,000 NTU 
0 to 30,000 NTU 

Resolution ........................................0.02 NTU 

 0.1 NTU 
 1 NTU 
 10 NTU 

* Exact ranging subject to probe performance. The 

WP-89

 will always select 

the range that provides the best resolution for the reading. 

Repeatability ........................2% ±1 digit on all ranges. 

Readout Modes.....................Turbidity (NTU) 

Relative Turbidity Reference (NTU) 
Relative Turbidity REL (Turbidity – Relative 
Turbidity Reference) 

Good Laboratory Practices....All readings and calibration constants are stored 

together with date and time and can be recalled at 
any time. 

Memory................................100 readings including date and time. 

Automatic Logging...............User-set for one reading every 1 to 90 seconds or 

minutes. 

RS232 Port (optional) ...........4800 baud, 8 bits, no parity, 1 stop bit, XON/XOFF 

Protocol. 

Summary of Contents for 125190




































Reviews:

No comments